PUBLICATION
()
-
2024 (3)
-
January (3)
- Effectiveness of taxation towards influencing the welfare of the country
- Role of information systems for management in multispeciality hospitals to improve performance: a conceptual framework
- Deep learning based identification of solid waste management in smart cities through garbage separation and monitoring
-
January (3)
-
2023 (16)
-
July (3)
- The effects of online education on the emotional well-being of college students during the spread of the covid-19 pandemic
- A multi-criteria decision-making approach to transport and logistics based on business intelligence
- An analysis of how emotional intelligence contributes to career advancement in the government sector
- May (3)
- March (2)
-
February (8)
- An empirical study on the customer perception towards fintech adoption
- Challenges encountered by the women among government sectors of hospitality industry
- Evaluation of private banks using promethee method
- Fruit juices spoilage in the juices processing industry and ways to prevent it through co-operative sectors
- Role of indian government in the resilience of tourism management
- Sustainable developments of hospitality and its challenges in the government organizations
- The role and importance of digitalization in hospitality sector to ease function
- A critical analysis in improving medical tourism and hospitality
-
July (3)
-
2022 (63)
-
June (63)
- Development and certification of chromic acid-free anodizing process for aircraft grade aluminium alloys
- Probabilistic strength based matrix crack evolution in multi-directional composite laminates
- Strength prediction of adhesively bonded joints using plastic zone size criterion
- Prediction of mode ii delamination propagation life under a standard spectrum loading in a carbon fiber composite
- Mixed mode cohesive zone modelling and analysis of adhesively bonded composite t-joint under pull-out load
- Matrix crack evolution in multi-directional composite laminates considering thickness effects
- Evaluation of progressive failure of composite t-joint using mixed mode cohesive zone model
- Effect of retrogression heat treatment time on microstructure and mechanical properties of aa7010
- Influence of crack driving force on correlating stress ratio effects in fatigue crack growth rate of a nickel base super alloy in720
- Variable amplitude fatigue testing to characterize mode ii delamination in a polymer composite
- Micromechanics modeling and prediction of stiffness degradation behavior of a fiber reinforced polymer nanocomposite under block amplitude fatigue loads
- A study on the fatigue life of a composite t-joint subjected to transport aircraft spectrum loads
- Fatigue life prediction of a unidirectional carbon fiber composite under off-axis spectrum loads using 3d constant life diagram
- Effect of ply-drop on fatigue life of a carbon fiber composite under a fighter aircraft spectrum load sequence
- Fatigue life of a carbon fiber composite t-joint under a standard fighter aircraft spectrum load sequence
- Onset-of-growth behaviour of mode ii delamination in a carbon fiber composite under spectrum fatigue loads
- Surface and electrochemical characteristics of novel chromate-free mn-v oxyanion sealed tartaric–sulfuric acid anodized coating
- Probabilistic strength based matrix crack evolution model in multi-directional composite laminates under fatigue loading
- Progressive damage analysis of adhesively bonded patch repaired carbon fibre–reinforced polymer specimen under compression involving cohesive zone model
- Improved fatigue crack growth resistance by retrogression and re‐aging heat treatment in 7010 aluminum alloy
- Effect of hygro thermal aging on the interlaminar shear strength of a carbon fiber composite
- Matrix cracking in polymer matrix composite under bi‐axial loading
- Influence of retrogression and re-ageing heat treatment on the fatigue crack growth behavior of 7010 aluminum alloy
- Damage tolerance capability of retrogression and re-aged 7010 aluminium alloy under falstaff loading
- Electrochemical and exfoliation corrosion behavior of reversion-treated high-strength aluminum alloy
- Fatigue crack growth prediction under spectrum load in an aluminium alloy using crack driving force k*eff approach
- Fatigue behavior of a hybrid particle modified fiberglass/epoxy composite under a helicopter spectrum load sequence
- Development and certification of chromic acid-free anodizing process for aircraft grade aluminium alloys
- Damage tolerance behaviour of a nickel-based super-alloy gtm718 under cold-turbistan variable amplitude loads
- Fatigue crack growth behaviour of a nickel base super alloy gtm720 under cold-turbistan spectrum load sequence
- High strain rate behavior of gtm-900 titanium alloy
- A study on the fatigue performance of a glass fiber epoxy nanocomposite under random fatigue loads
- Fatigue crack closure evaluation under constant amplitude and spectrum loading
- Cm manjunatha, bk parida. prediction of fatigue crack growth after single overload in an aluminum alloy
- Fatigue crack growth prediction under spectrum load using crack driving force
- Fatigue crack growth prediction under spectrum load sequence in an aluminum alloy by k*-rms approach
- The effect of rubber micro particles and silica nano particles on the tensile fatigue behavior of a glass fiber epoxy composite
- The cyclic-fatigue behavior of an epoxy polymer modified with micron-rubber and nano-silica particles
- The tensile fatigue behavior of a gfrp composite with rubber particle modified epoxy matrix
- The tensile fatigue behavior of a silica nanoparticle-modified glass fiber reinforced epoxy composite
- The tensile fatigue behavior of a glass fiber reinforced plastic composite using a hybrid toughened epoxy matrix
- Construction of constant fatigue life diagram for a carbon fiber composite
- Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite
- The effect of micron-rubber and nano-silica particles on the fatigue crack growth behavior of an epoxy polymer
- The fatigue and fracture behavior of micron-rubber and nano-silica particles modified epoxy polymer
- Fatigue de-bond growth in an adhesively bonded single lap joint
- Numerical and experimental analysis to predict the compressive strength of pristine composite laminates
- Fatigue fracture of a compressor disc of an aero engine
- Fatigue behavior of a nanocomposite under a fighter aircraft spectrum load sequence
- Enhanced fatigue behavior of a glass fiber reinforced hybrid particles modified epoxy nanocomposite under wisperx spectrum load sequence
- Prediction of onset of mode i delamination growth under a tensile spectrum load
- Enhanced fatigue performance of a polymer nanocomposite under spectrum loads
- Prediction of delamination growth behavior in a carbon fiber composite laminate subjected to constant amplitude compression-compression fatigue loads
- Effect of hot-wet conditioning on the mechanical and thermal properties of im7/8552 carbon fiber composite
- Influence of micro and nano particulate fillers on the fatigue crack growth rate of an epoxy polymer
- Bs mithuna, hk rangavittal, ar anilchandra, r bojja, n jagannathan, cm manjunatha. stiffness degradation behavior of a polymer nanocomposite under constant amplitude fatigue loads. international journal of advanced scientific and technical research, vol.
- Stiffness degradation behavior of a polymer nanocomposite under constant amplitude fatigue loads
- Mechanical properties of a hybrid nanocomposite under room temperature and hot-wet environments
- Fracture and fatigue behavior of polymer nanocomposites-a review
- Fatigue crack growth prediction in nickel base super alloys under cold-turbistan spectrum loads using franc3d
- A study on the fatigue crack growth behaviour of gtm718 nickel based super alloy under cold-turbistan spectrum loads, theoretical and applied fracture mechanics
- A brief review on the fatigue behavior of continuous fiber reinforced thermosetting epoxy polymer based nanocomposites
- A comparison of damage tolerance behaviour of two different nickel base super alloys under a turbine standard spectrum loads
-
June (63)
-
2019 (13)
- June (2)
- May (1)
- April (2)
-
March (3)
- Electromagnetic shielding, magnetic and microwave absorbing properties of polypyrrole/ ba0.6sr0.4fe12o19 composite synthesized via in-situ polymerization technique
- Evolution of magnetoresistance behavior at low temperatures in naturally oxidised specular spin valve systems
- Optical properties of sputter deposited nanocrystalline cuo thin films
- February (2)
-
January (3)
- Nanolayered multilayer ti/tin coatings: role of bi-layer thickness and annealing on solid particle erosion behavior at elevated temperatur
- Enhanced microwave absorption properties of pmma modified mnfe2o4–polyaniline nanocomposites
- Transition metal based cuxniycoz-x-yo4 spinel composite solar selective absorber coatings for concentrated solar thermal applications
-
2018 (17)
- November (1)
- October (2)
- September (1)
- August (2)
- July (1)
- June (1)
- April (1)
- February (1)
-
January (7)
- Synthesis of silver nanowires towards the development the ultrasensitive...
- Environmental stability of transparent and conducting ito thin films coated...
- Enhancing spectrally selective response of w/waln/walon/al2o3 –based...
- Tailored periodic si nanopillar based architectures as highly sensitive...
- Corrosion and wear resistance properties of multi-layered diamond‐like carbon nanocomposite coating
- Effects of environmental and operational variability on the spectrally selective properties of w/waln/walon/al2o3 -based solar absorber coating
- Experimental analysis and evaluation of a vacuum enclosed concentrated solar thermoelectric generator coupled with a spectrally selective absorber coating
-
2017 (68)
- December (1)
-
November (6)
- Design and development of customized communication protocol for the serial link interface from pci-e add-on card
- Charge transport studies on si nanopillars for photodetectors...
- Solar energy absorption mediated by surface plasma polaritons in spectrally...
- Measurement of high temperature emissivity and photothermal conversion efficiency...
- Corrosion protection behaviour of silica–titania hybrid coatings embedded with silica nanoparticles
- An improved speedometer
-
October (11)
- Heat transfer in rotating rayleigh ̶ bénard convection with rough plates
- Effect of mean and fluctuating pressure gradients on boundary layer turbulence
- Density measurements using background oriented schlieren technique
- Influence of propeller slipstream on vortex flow field over a typical micro air vehicle
- Acoustic characterization of jet interaction with launch structures during lift-off
- Influence of leading edge tubercles on aerodynamic characteristics of a high aspect-ratio uav
- Near wake field of circular cylinder with a forward splitter plate
- Effect of transonic fresstream on linear cluster plug nozzle flow
- Experimental investigation on the near flow field of dual stream nozzles
- Piv investigation on the lift enhancing capabilities of self-adaptive flaps on low aspect ratio wings
- Evaluation of solution combustion synthesized nio/gdc...
-
September (8)
- Porous nickel telluride nanostructures as bifunctional electrocatalyst...
- Solution precursor plasma spray process: a promising route for the fabrication...
- Chromate and hf free pretreatment for mao/electroless nickel coating on az31b magnesium alloy
- Fundamentals of em design of radar absorbing structures (ras)
- Corrosion, wear, and cell culture studies of oxygen ion implanted ni–ti alloy
- Corrosion and wear properties of ti/tetrahedral amorphous carbon multilayered coating
- Carbon nanotubes stabilize high temperature phase and toughen...
- A comparative study on the synthesis and properties of suspension...
- August (4)
-
July (6)
- Effect of clustering on linear plug nozzle flow field for overexpanded internal jet
- Influence of acoustic reflection on measurement locations in a large reverberation chamber
- Qualification tests on spacecraft and launch vehicle subsystems for acoustic environment
- Optical properties of tialc/tialcn/tialsicn/tialsico/tialsio tandem absorber...
- Development and characterization of ni-ysz coating on stainless steel by hvof process
- Hot corrosion studies on plasma sprayed bi-layered...
-
June (6)
- Review on the machining characteristics and research prospects of conventional...
- Shape induced magnetic vortex state in hexagonal ordered cofe nanodot...
- Development of two axes magnetometer for navigation applications
- Effect of p addition on structure and microhardness of electrodeposited...
- Effect of composition on the polarization and ohmic resistances...
- An improved solar selective coating having high thermal...
-
May (5)
- Assessment of various low-profile mechanical vortex generators in controlling a shock-induced separation”
- High coercivity sm-co thin films from elemental sm/co multilayer deposition...
- Transparent hydrophobic and superhydrophobic coatings fabricated...
- Effect of surface finishing on the formation of nanostructure and corrosion behavior of ni-ti alloy
- A hybrid multilayer solar selective coating for high temperature solar thermal...
- April (1)
-
February (6)
- Improved h2s sensitivity of cobalt phthalocyanine film fabricated on plasma...
- Electro-mechanical response to the harmonic actuation of the pneumatically...
- Dual-layer oxidation-protective plasma-sprayed sic-zrb2/al2o3-carbon nanotube coatings on graphite
- Uv and thermally stable polystyrene-mwcnt superhydrophobic coatings
- Monostatic radar cross section of flying wing delta planforms
- Mechanical micro-drilling of nimonic 80a superalloy using uncoated...
-
January (14)
- Influence of defects on electrical properties of electrodeposited co-doped zno nanocoatings
- Enhanced cl2 sensitivity of cobalt-phthalocyanine, film by utilizing...
- An experimental investigation on the machining characteristics of nimonic 75 using uncoated...
- Design and development of ito/ag/ito spectral beam splitter coating...
- Eis and xps studies on the self-healing properties of ce-modified silica-alumina...
- Microstructure and performance of lsm/ysz based solid oxide...
- Architecture level safety analyses for safety-critical systems
- Performance of co/ti multilayers in a water window soft x-ray regime
- Glow discharge plasma polymerized nanostructured polyaniline thin film optical waveguide
- Microstructure and electrical properties of plasma sprayed gd0.15ce0.85o2-ᵟ coatings...
- Tailored poly(ethylene) glycol dimethacrylate based shape memory polymer for orthopaedic applications
- Electrospinning in solid oxide fuel cells – a review
- Ceria nanoparticles vis-à-vis cerium nitrate as corrosion inhibitors...
- Model-based analysis of safety critical validation algorithm
-
2016 (71)
-
December (5)
- Evaluation of nanoalumina coated germanium black polyimide membrane...
- Nanocolumnar crystalline vanadium oxide-molybdenum oxide antireflective...
- Impact of low-pressure glow-discharge pulsed plasma polymerization on properties...
- Noble metal ions in ceo2 and tio2: synthesis, structure and catalytic properties
- Properties of nano-structured ni/ysz anodes fabricated from plasma sprayable...
-
November (5)
- Probe suppression in conformal phased array
- Incorporation of cr3+ ions in tuning the magnetic and transport properties of nano zinc ferrite
- Effect of ba+2 ion on structural magnetic and microwave properties of screen...
- Microstructure and polarization studies on interlayer free la0.65sr0.3co0.2fe0.8o3-ᵟ...
- Wear resistant and fuel efficient ni-co based composite coating for engine cylinder application
-
October (13)
- Em wave propagation analysis in plasma covered radar absorbing material
- Multilayers solar selective coating for high temperature solar thermal applications
- Transitions in turbulent rotating convection: a lagrangian perspective1
- Optimization of process parameters to achieve spectrally selective...
- Effect of low temperature vacuum annealing on microstructural, optical, electronic...
- Fabrication of high aspect ratio broadband antireflection porous nano-network...
- Angular solar absorptance and thermal stability of w/waln/walon/al2o3 – based...
- Non-intrusive flow diagnostics for aerospace applications
- Flow anisotropy in rotating buoyancy-driven turbulence
- Transitions in turbulent rotating convection: a lagrangian perspective
- Experimental and numerical study of secondary flow and coolant film interaction in a high subsonic cascade tunnel
- Effect of particle injection on heat transfer in rotating rayleigh ̶ bénard convection
- Radar cross section of a parallel-fed cylindrical array of dipoles
-
September (6)
- Experimental investigation of an incident shock-induced interaction near an expansion corner
- Publication3
- Studies on electroless nickel polyalloy coatings over carbon fibres/cfrs composites
- Preparation of oil encapsulated microcapsules and tribological property of ni composite...
- Fabrication of superhydrophobic zinc stearate hierarchical surfaces from different precursors
- Wear and progression of life of plasma nitride four-faceted hss drills with varying geometries
-
August (5)
- The effect of additives on the properties of electrodeposited ni-zircon composite coatings
- Effect of anodization and annealing on corrosion and biocompatibility of niti alloy
- Colored selective absorber coating with excellent durability
- Transparent conductive ta/al/ta-grid electrode for optoelectronic and emi shielding applications
- Improved broadband and omnidirectional light absorption in silicon nanopillars...
-
July (7)
- Analytical estimation of rcs of infinitely long conducting cylinder coated with metamaterial
- Corrosion and wear response of oxide reinforced nickel composite coatings
- An improved solar selective coating having high thermal stability and a process...
- Evolution mechanism of mesoporous silicon nanopillars grown...
- Controlled growth of high-quality graphene using hot filament chemical vapour deposition
- Effect of oxygen plasma immersion ion implantation on the formation...
- Fesem and xps studies of zro2 modified electrodeposited nicocraly...
-
June (5)
- Spectrally selective absorber coatings of waln/walon/al2o3 for solar thermal applications
- Microwave heat treatment of natural ruby and its characterization
- Performance evaluation of a thermally concentrated solar thermo-electric...
- Role of component layers in designing carbon nanotubes-based tandem absorber...
- Deposition and evaluation of mn-co oxide protective sputtered coating...
-
May (5)
- Extraordinary high broadband specular transmittance of sodalime glass...
- Performance evaluation of a natural convective-cooled concentration...
- Broadband quasi-omnidirectional sub-wavelength nanoporous...
- Broadband and wide angle anti-reflective nanoporous surface on poly...
- Numerical-based radar cross section estimation of dielectric cylinder
-
April (4)
- In-vitro biocompatibility studies of plasma-nitrided titanium alloy β-21s using fibroblast cells
- Effect of shape and magneto-crystalline anisotropies in ordered co nanorod...
- Effect of electrolyte temperature on the formation of highly ordered...
- Optical and electrical properties of ito thin films sputtered on flexible fep...
- March (4)
- February (4)
-
January (8)
- Evaluation of elasto-plastic properties of ito film using combined...
- Point cloud mapping measurements using kinect rgb-d sensor and kinect fusion for visual odometry
- Development of voice activated ground control station
- Robust active noise control system for fighter aircraft pilot helmet application
- Uncertainity estimation based approach to attitude control of fixed wing uav
- Influence of graphite on tribological and thermal properties
- Effect of aramid pulp and lapinus fiber on the friction and wear behavior of nbr powder
- Robust active noise control system for fighter aircraft pilot helmet application
-
December (5)
-
2015 (61)
- December (2)
- November (3)
-
October (6)
- Control of base pressure for a boat-tailed axisymmetric afterbody via base geometry modifications
- Transition control of mach to regular reflection induced interaction using an array of micro ramp vane-type vortex generators
- Control of shock-wave boundary layer interaction using steady micro-jets
- Corrosion behaviour of tetrahedral amorphous carbon (ta-c) filled titania nano tubes
- Active cancellation of probing in linear dipole phased array
- Parallel-fed planar dipole antenna arrays for low observable platforms
-
September (9)
- Almon based spectrally selective coating with improved thermal stability...
- Low profile conformal antenna arrays on high impedance substrate
- High performance single layer nano-porous antireflection coatings on glass...
- Design and fabrication of spectrally selective tialc/tialcn/tialsicn/tialsico/tialsio...
- Graphitic-carbon nitride support for the synthesis of shape-dependent zno...
- High performance nanostructured cr-ws2 solid lubricant coatings prepared...
- Optical simulation and fabrication of hfmon/hfon/al2o3 spectrally selective coating
- Editorial on the thematic issue: supersonic flow control, shock waves
- Experimental study of subsonic and sonic jets controlled by air tabs
-
August (5)
- Unsteady flow conditions during dual-bell sneak transition
- Numerical simulation of shock/boundary layer interaction in supersonic overexpanded nozzles
- Optical and rf transparent protective alumina thin films
- Structural and mechanical properties of reactively sputtered tialc nanostructured hard coatings
- Rcs estimation of linear and planar dipole phased arrays: approximate model
- July (2)
- June (4)
-
May (9)
- Evaluation of corrosion resistance and self-healing behavior of zirconium–cerium...
- A design of fpga based intelligent data handling interfacing card
- Implementation of image processing on raspberry pi
- Corrosion behavior of sputtered alumina thin films
- Correlation studies in the acoustic far-field of non-ideally expanded jets1
- Growth, characterization and interfacial reaction of magnetron sputtered pt/ceo2...
- Consequence of oxidant to monomer ratio on optical and structural properties...
- Development and high temperature property evaluation of ni-co-cr-al composite electroforms
- Electrochemical behavior and effect of heat treatment on morphology, crystalline...
-
April (5)
- Controlling the micro air vehicle through voice instructions
- Video stabilization for micro air vehicles
- Wear and corrosion resistant properties of electrodeposited ni composite...
- Role of powder metallurgical processing and tib reinforcement on mechanical...
- Controlling the micro air vehicle through voice instructions
-
March (8)
- Design of virtex-6 fpga based data concentrator card
- Study of the structural, thermal, optical, electrical and nanomechanical...
- Design of virtex-7 fpga based data communication device
- Combustion synthesis in nanostructured reactive systems
- Joint encryption/watermarking based on arnold cat map and dct
- Plasma-based radar cross section reduction
- Radar cross section of dipole phased arrays with parallel feed network
- Scattering cross section of unequal length dipole arrays
- February (3)
-
January (5)
- Effect of anodized oxide layer ageing on wettability of alkyl silane coating...
- Mechanical properties of titanium-titanium boride composites through nanoindentation...
- Analysis of squeeze flow of fluids between solid and porous surfaces
- Vision based tracking of moving target in an autonomous ground vehicle framework
- Synthesis and fabrication of nanomaterials,bloomsbury
-
2014 (50)
- December (3)
-
November (6)
- Shock wave boundary layer interaction in supersonic flow over a forward-facing step
- In-vitro corrosion studies of surface modified niti alloy for biomedical applications
- Growth, characterization and performance evaluation of ti/altin/altion/altio...
- Effect of the size of silica nanoparticles on wettability and surface...
- Leader follower formation control of ground vehicles using camshift based guidance
- Novel and effective sensor validation algorithms for safety critical systems
- October (2)
-
September (5)
- Investigations on plastic flow and creep behavior in nano and ultrafine grain ni by nano- indentation
- Analytical estimation of radar cross section of arbitrary compact dipole array
- Scratch cell test- a simple, cost effective screening tool to evaluate...
- Characterization and corrosion behavior of co and co–p coatings electrodeposited from chloride bath
- Effect of wettability and surface roughness on ice-adhesion strength...
-
August (7)
- Properties and development of ni/ysz as an anode material in solid oxide fuel cell: a review
- Properties of plasma sprayed yttria stabilized zirconia thermal barrier...
- Interface reaction between electroless ni–sn–p metallization and lead-free...
- Xps study of sputtered alumina thin films
- Tuning of deep level emission in highly oriented electrodeposited zno...
- Synergistic effect of v and mn oxyanions for the corrosion protection...
- Process for the preparation of high density slip-cast fused silica bodies
- July (2)
-
June (4)
- Interface reaction between an electroless ni–co–p metallizationand sn–3.5ag...
- Anomalous enhancement in interfacial perpendicular magnetic anisotropy through uphill diffusion
- Microstructural studies of e-beam evaporated alumina thin films
- Growth and structural characterization and interfacial reaction of magnetron...
- May (4)
- April (2)
-
March (6)
- Arinc 653 api and its application - an insight into avionics system case study
- Analysis of annular plug nozzle flowfied,” journal of spacecraft and rockets
- The electro-mechanical performance of electro-active polymer based...
- Electrochemical studies and growth of apatite on molybdenum doped...
- Experimental investigation of lift and drag characteristics of a typical mav under propeller induced flow
- Experimental investigation of lift and drag characteristics of a typical mav under propeller induced flow
- February (4)
-
January (5)
- Carbon nanotube-based tandem absorber with tunable spectral selectivity: transition...
- Superhydrophobic polytetrafluoroethylene surfaces with leaf-like micro-protrusions...
- An approach for in situ measurement of anode temperature during the growth...
- Performance analysis of networks in net centric warfare
- Improving network performance by mitigating ici and allocating resources for next generation wireless networks
-
2013 (66)
-
December (6)
- Studies on the influence of steady microactuators on shock-wave/boundary-layer interaction
- Different morphologies of zinc oxide nanostructures grown...
- Influence of zirconium doping on the growth of apatite and corrosion...
- Superhydrophobic surface modification of aluminum alloy 2024...
- A framework for the software aspects of the safety certification for indigenously developed aircraft systems
- Measurement technique to evaluate model-based tools for safety critical embedded systems
-
November (7)
- An effective verification and validation strategy for safety critical embedded systems
- Ni–mo–co ternary alloy as a replacement for hard chrome
- In vitro corrosion behavior and apatite growth of oxygen plasma ion implanted titanium alloy β-21s
- Efficacy of modified improved lms algorithm in active cancellation of probing in phased array
- Characterization and hardness of co-p coatings obtained from direct...
- Novel and effective sensor validation algorithms for safety critical systems
- State of art enhanced fatigue meter adaptable across aircrafts
-
October (10)
- Wear and corrosion behavior of oxygen implanted biomedical...
- Effect of truncation on the aeroacoustics of an annular aerospike nozzle’
- Anisotropic magnetic properties of bi-layered structure of ordered...
- Superhydrophobicity on transparent fluorinated ethylene propylene...
- Xps studies on the interaction of ceo2 with silicon in magnetron sputtered...
- Density field visualization of a micro-explosion using background oriented schlieren
- Role of coherent structures in supersonic impinging jets
- Double layer sio2/al2o3 high emissivity coatings on stainless steel...
- A process for the manufacture of embossing rollers and embossing rollers manufactured thereby
- A process for the preparation of plasma sprayable yttria stabilized...
-
September (5)
- Xps characterization and hardness of heat treated co-w coatings...
- Effect of gas composition on nitriding and wear behaviour of nitrided...
- Solar selective coating having higher thermal stability useful for harnessing...
- Structural and magnetic properties of smco5/co exchange coupled nanocomposite thin films
- Scattering analysis of a compact dipole array with series and parallel feed network
-
August (4)
- Scattering analysis of unequal length dipole array in the presence of mutual coupling
- Rf field build-up inside a manned space vehicle using novel ray-tracing algorithm
- Effect of titania particles preparation on the properties of ni-tio2...
- Vapor-solid growth of molybdenum oxide nanowhiskers: wettability studies and growth process
- July (3)
-
June (5)
- Mutual coupling effect in phased arrays: a review
- Preparations of molecularly imprinted polymers for heptachlor: an organochlorine pesticide
- Characterization and microhardness of co-w coatings electrodeposited...
- Effect of silica and heat treatment on polystyrene-sio2 wetting behavior
- electrochemical behavior of superhard nanocomposite coatings...
-
May (5)
- Experimental studies on rectangular jets with trapezoidal tabs
- superhydrophobic polytetrafluoroethylene surfaces with leaf-like...
- Reynolds number influence on dual-bell transition phenomena
- Correlation studies in the acoustic far-field of non-ideally expanded jets
- Smart antennas for mobile autonomous systems: adaptive algorithms for acceleration
- April (3)
-
March (7)
- Supersonic testing of nal binary pressure sensitive paint
- Effective corrosion inhibition performance of ce3+ doped sol–gel...
- Magnetic properties of ordered bi-layer nanowire arrays with...
- Properties of plasma sprayed la2zr2o7 coating fabricated from powder...
- Superhydrophobic nanostructured kapton® surfaces fabricated through...
- Effect of gas composition on corrosion behavior and growth of apatite...
- Investigation of electrochemical behavior of nitrogen implanted...
-
February (6)
- Magnetic and magneto-resistance studies of the evolution of the magnetic...
- Comparison in the oxidation and corrosion behavior of aluminum...
- Studies on surface structure, morphology and composition of co-w alloy...
- Optimization of parameters for the growth of defect free zno nanorod...
- Spectrally selective crmon/cron tandem absorber for mid-temperature solar thermal applications
- Rf field mapping inside large passenger aircraft cabin using refined ray-tracing algorithm
-
January (5)
- The corrosion resistance of nickel electrocomposite coating containing bafe12o19 particle
- Wear and corrosion behavior of zr doped dlc on ti-13zr-13nb biomedical alloy
- Robust and variable step-size versions and application
- Finite element method based absolute pressure sensitivity optimized membrane type double cavity vacuum sealed piezoresistive sensor
- A novel binary pressure sensitive paint and a process for preparing the same
-
December (6)
-
2012 (52)
-
December (9)
- Effect of feedstock powders on the microstructural and electrical...
- A process for the preparation of solar selective absorber coatings over metals and alloys
- High temperature oxidation and corrosion behaviour of ni/ni–co–al composite coatings
- Raman imaging on high quality graphene grown by hot-filament chemical vapor deposition
- Studies on the fabrication and characterization of optical sensor...
- Shockwave/boundary-layer interaction control on a compression ramp using steady microjets
- Gas density effects on dual-bell transition behavior
- Nanometric multi-scale rough, transparent and anti-reflective zno...
- Flowfield analysis of linear plug nozzle
- November (1)
-
October (6)
- Aircraft attitude estimation from a video sequence using simple trigonometric expressions
- Electroless ternary nicep coatings: preparation and characterization
- Dual-scale rough multifunctional superhydrophobic ito...
- Superhydrophobic surfaces fabricated by surface modification of alumina particles
- Characterization of amorphous co-p alloy coatings electrodeposited...
- Experimental studies on a rudimentary four wheel landing gea
-
September (6)
- Mutual coupling effects for radar cross section (rcs) of a series-fed dipole antenna array
- Properties of plasma sprayed scsz electrolyte coating
- A single step solution combustion approach for preparing gadolinia...
- Thermally stable and transparent superhydrophobic sol-gel coatings by spray method
- Effect of critical plasma spray parameters on the microstructure...
- The surface and electrochemical analysis of permanganate based...
- August (2)
- July (3)
-
June (5)
- A survey on video stabilization algorithms
- Effect of coherent to incoherent structural transition on magnetic anisotropy in co/pt multilayers
- Characterization of shape memory behaviour of ctbn-epoxy resin system
- Corrosion behavior of titanium alloy -21s coated with diamond like carbon in hank's solution
- Xrd, fesem and xps studies on heat treated cow electrodeposits
- May (3)
- April (1)
-
February (4)
- Sputter deposited low-friction and tough cr-si3n4 nanocomposite coatings on plasma nitrided m2 steel
- Electrodeposition of ni and co coatings from ionic liquid
- Wettability of y2o3: a relative analysis of thermally oxidized, reactively...
- Ar+h2 plasma etching for improved adhesion of pvd coatings on steel substrates
-
January (12)
- Electrodeposited nickel composite coating containing in-situ nickel impregnated alumina particles
- Sputter deposited nanostructured au-ws2 solid lubricant coatings
- Phase transformation behaviour of nanocrystalline ni–w-p alloys containing various w and p contents
- Improved corrosion protection of aluminium alloy aa2024 by sol-gel...
- Properties of phase separation method synthesized superhydrophobic polystyrene films
- A novel ins/gps fusion architecture for aircraft navigation
- Putter deposited nanostructured au-ws2 solid lubricant coatings
- Electrochemical corrosion behavior of dc electrodeposited co-p coatings
- Green inhibitors for corrosion protection of metals and alloys: an overview
- Design of ag-si3n4 nanocermet coatings for photothermal conversion applications
- In situ electrochemical thinning of barrier oxide layer of porous anodic alumina template
- International journal of software engineering & applications
-
December (9)
-
2011 (36)
-
December (7)
- Experimental evaluation of a shape memory alloy wire actuator...
- Freestream effects on base pressure development of an annular plug nozzle’’
- An experimental study of the linear plug flow-field and base pressure development in freestream flow
- Cold gas testing of a thrust optimized parabolic nozzle in a high altitude simulation chamber
- Generation and control of oblique shocks using microjets
- Cold gas dual-bell transition tests in a high altitude simulation chambe
- Effect of mn/mo incorporated oxide layer on the corrosion behavior of aa 2024 alloy
- November (4)
- October (4)
- August (2)
-
July (4)
- A novel algorithm for suppression of wideband probing in adaptive array
- Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia...
- Avionics systems, integration and technologies for light transport aircraft
- Structure and optical properties of ag-al2o3 nanocermet solar selective...
- June (3)
- May (4)
- April (2)
- March (3)
- February (2)
- January (1)
-
December (7)
-
2010 (30)
- December (3)
- November (2)
-
October (8)
- Study of intermittent transitional boundary layer using piv
- Experimental study on a jet issuing from an elliptic nozzle with cylindrical tabs
- Density field measurements of a supersonic impinging jet with microjet control
- Electroless ternary ni-w-p alloys containing micron size al2o3 particles
- Structure, morphology and chemical composition of sputter deposited...
- Role of oxygen impurity in growth and magnetic properties of ni83fe17 permalloy thin films
- Synthesis and characterization of ni–al2o3 composite coatings containing different forms of alumina
- Effect of microstructure and surface roughness on the wettability...
-
September (6)
- Variable step-size griffiths' algorithm
- Application of photogrammetry to surface flow visualization
- Performance evaluation of tialcryn nanocomposite coatings deposited...
- Improvement in the properties of nickel by nano cr2o3 incorporation
- Active noise control. signal, image and video processing
- Vector field guidance for path following of mavs in three dimensions for variable altitude maneuvers
- August (3)
- June (1)
- May (1)
- April (2)
- March (1)
- February (2)
- January (1)
-
2009 (20)
- November (1)
- October (3)
- September (1)
- July (1)
-
May (6)
- Performance characteristics of an annular conical aerospike nozzle with freestream effect
- Surface flow studies of restricted shock separation in a thrust optimized parabolic nozzle
- Shock unsteadiness in a thrust optimized parabolic rocket nozzle
- Fabrication of a bi-luminophore temperature sensitive coating by embedding...
- Modified solution combustion route for the preparation of plasma sprayable ceria powder
- General aviation aircraft avionics: integration & system tests
- April (2)
- March (1)
- February (2)
- January (3)
-
2008 (26)
- November (1)
- October (3)
-
September (5)
- Investigation of interface properties of sputter deposited tin/crn...
- Deposition of tialn coatings using reactive bipolar pulsed direct current...
- Growth and characterization of chromium oxide coatings prepared...
- Combustion synthesis and nanomaterials
- A study on the electrophoretic deposition of 8ysz coating using mixture...
-
July (4)
- A novel electrolyte composition useful for electrochemically assisted arc machining
- Deposition and characterization of tialn/tialon/si3n4 tandem absorbers...
- Influence of sic, si3n4 and al2o3 particles on the structure and properties of electrodeposited ni
- Preparation and characterization of autocatalytic low phosphorus...
- June (1)
- May (2)
- April (3)
- March (1)
- February (2)
-
January (4)
- Spectroscopic ellipsometric characterization of tialn/tialon/si3n4 tandem...
- Structure and optical properties of pulsed sputter deposited cr2o3-cr-cr2o3 solar selective coatings
- Monostatic radar cross section of flying wing delta planforms
- Polyol mediated synthesis of tungsten trioxide and ti doped tungsten trioxide part 2
-
2007 (29)
- December (1)
- November (2)
- October (3)
- September (1)
- August (1)
- July (1)
-
June (6)
- Electrochemical studies of stainless steel implanted with nitrogen...
- Synthesis and properties of electrodeposited nickel/yttria doped ceria nanocomposite coatings
- Composition, structure and morphology of oxide layers formed...
- Structure and phase transformation behaviour of electroless ni-p alloys containing tin and tungsten
- Solar selective coating having higher thermal stability useful for harnessing solar energy...
- Civil aircraft advanced avionics architectures - an insight into saras avionics, present and future perspective13
-
May (4)
- Improved availability and reliability using reconfiguration algorithm for task or process in flight critical software
- Reconfiguration avionics architecture using reconfiguration algorithm for flight critical applications
- Re-configuration avionics architecture using re-configuration algorithm for flight critical applications
- Avionics testing and integration for general aviation light transport aircraft: practical functional and operational integration activities for lta
- April (3)
- March (1)
- February (3)
- January (3)
-
2006 (27)
- December (2)
- November (3)
-
October (7)
- Computational studies on flow through de laval nozzle
- Investigation of hysteresis effects on a wing-flap configuration at high-lift using piv
- Piv studies of large scale structures in the near field of small aspect ratio elliptic jets
- Forward flight effects on fan noise from supersonic 2-d inlets
- Pressure sensitive paint measurements on a delta wing in supersonic flow
- Studies on autocatalytic deposition of ternary ni-w-p alloys using nickel sulphamate bath
- Reactive sputtering of hard nitride coatings using asymmetric-bipolar pulsed dc generator
- September (2)
- August (2)
- May (1)
-
April (4)
- An improved process relating to the thermal stability of solar selective...
- Studies on electroless ni-w-p and ni-w-cu-p alloy coatings using chloride based bath
- Characterization of low temperature deposited nanolayered tin/nbn multilayer coatings...
- Effect of electroless nickel interlayer on the electrochemical behavior of single...
- March (2)
-
February (3)
- Re-configurable software driven data acquisition system for ground based aircraft systems impact of technology on the maintainability and reliability of modern advanced acquisition system
- Modern trend in avionics for multirole transport aircraft and flight test requirements
- Re-configurable software driven data acquisition system for ground based aircraft systems - impact of technology on the maintainability and reliability of modern advanced data acquisition system
- January (1)
- 2005 (7)
- 2004 (14)
- 2003 (12)
- 2002 (6)
- 2001 (4)
- 2000 (4)
- 1999 (7)
- 1998 (4)
- 1997 (2)
- 1996 (4)
- 1995 (2)
- 1993 (2)
- 1992 (1)
- 1991 (1)