An ab-initio simulation facility is currently set up in FMCD as shown in the Figure 1. This is a generic 3D Aerodrome scenario visualization facility with the traffic...
MoreSpecifically designed to reduce the military aircraft noise inside helmet without interfering with the voice communication signals. Generic design enables the...
MoreFor several decades, chromic acid anodization (CAA) has been typically used for the protection of critical structures with all kinds of joints in aircraft and automobile...
More(SPARCS: Stealth Platform Asymptotic Radar Cross-section Software) Key features: Radar Cross Section Estimation Software using Hybrid Asymptotic High Frequency Methods...
MoreA rapid prototyping system called Desktop Flight Simulator (DFS) for flight controller design has been developed. DFS runs on x86-based computer system on Windows...
MoreDrishti is an Indigenous - Innovative –Cost effective visibility measuring system –- First of its type and CSIR-National Aerospace Laboratories is the only...
MoreTwo indigenous, cost effective electronic target training systems for perfecting soldier marksmanship skills by accurately determining the location of bullet impact on...
MoreEnhanced fatigue meter is the latest state of art system with a microprocessor and MEMS accelerometer, which monitors the fatigue life of aircraft by computing the 'g'...
MoreThe ESVS flight simulator at the Flight Mechanics and control division is to carry out research and develop Enhanced and Synthetic Vision System (ESVS) operational...
MoreThe use of multi-sensor system is becoming more important in widespread applications in different sectors such as automotive, aerospace, consumer electronics and...
MoreThe NALSIM Ground Simulator is developed as per the requirements of Test Pilots and delivered the same to ASTE, Bangalore. This simulator has the capability...
MorePC based Hardware in Loop Simulation (HILS) set up is used for the verification of the onboard autopilot software and hardware functionalities in the simulation...
MoreCSIR- NAL has successfully developed state-of-art Indigenous Autoclave Technology for processing advanced light weight composites that are integral to modern day civil...
MorePolymer Composite Chassis for 8 Ch Data Recording Unit (LRU) of LCA Dimensions : 172.2X80.7X63 (LXWXH) Weight :
MoreTRINETRA ‘T’ Shape Dual – Visual Thermal Sensor is a high-end camera with built in custom-intelligent, long range view catching capability with capacitive...
MoreRepair techniques for aerospace and other advanced composite structures enhances their useful life and saves time and money. Among the various repair techniques, hot...
MoreThe Materials Science Division (MSD) of CSIR - National Aerospace Laboratories has been carrying out R&D on NiTi Shape Memory alloys (SMAs) since 2002. The Division has...
MoreCSIR-NAL Bangalore has delivered ground based and airborne radomes for various national programs during the past thirty years. CSIR-NAL team (comprising of CEM, MT,...
MoreSpecifications Re-configurable MFD for engine and flight instrumentation system pages Touch screen based controls...
MoreThis facility is being used by the flight crew primarily for procedures training and by the SARAS design teams for testing of the systems like AFCS. The specifications...
MoreCarbon fibers are well known for their high specific strength and modulus. Composites of carbon fiber offer advantages for advanced material solutions such as...
MoreCeramic substrates are used for a wide range of applications in electronics including thin and thick film microelectronics, high power and high frequency circuit,...
MoreNAL’s Vision Technologies for targeting and surveillance applications offer performance solutions in different challenging conditions that are harsh, rarely benign and...
MoreThe knowledge base of aerodynamics and composite technologies related to high-end aerospace applications are being utilized for spin-off societal applications in the...
MoreNAL664 is ARINC 664 compliant FPGA IP Core with support for data for high speed application. Fully compliant to Aircraft Data Network Architecture for IMA implementation...
MoreNAL818 is ARINC 818 compliant FPGA IP Core with support for video and data for high speed application. Easy to use interfaces for native connectivity. Device Support:...
MoreIGAPS is an Integrated Modular Avionics based processing system, developed at CSIR-NAL for FAR 25 class of aircraft. First time in INDIA for CIVIL aircraft . ...
MoreADS is an non smart display system, developed at CSIR-NAL for FAR 25 class of aircraft. 15 inch active matrix liquid crystal display with LED back light. FEATURES...
MoreNAL had designed and developed the airborne nose cone radome of Jaguar maritime fighter aircraft for HAL/IAF. The NAL developed radomes are in service since 2008. Later,...
MoreIndigenous design and developed Fully digital autopilot Onboard 10 Degree of Freedom (DoF) IMU Onboard 3 Axes Sensors (Gyro, Accelerometer, Magnetometer) + Altitude...
MorePowered Hang Glider Avionics Data Logger has been realized using Programmable Systems On Chip (PSoC), 9 Degree of Freedom (DoF) sensor having 3-Axis Accelerometer,...
MoreDevelopment of C/SiC and SiC/SiC composite products through CVI Process. These high performance composites find applications in strategic sectors (e.g. Jet vanes,...
MoreTrichrome passivated Zn-Ni coating has been developed as a replacement for the conventional chrome passivated cadmium coating on PH, CM and NCM steels. The coating upon...
MoreAutoclave processing of prepregs is a well-established process in the aircraft industry. It offers excellent reliability and part quality mandated for airworthy...
Moreto withstand service temperature upto 200⁰C Most of the composite structures for the aircraft are developed using carbon-epoxy prepreg material system which can...
MoreAdvanced Composites Division provides an FBG based online strain and load monitoring system for airframe structures. SHM technologies offer a ‘condition-based...
MoreSalient Technical Features including Competing Features: Displays Flight Critical Engine Parameters Displays Cautions/Warnings with Emergency & Procedure Actions...
MoreFlight Operation and Quality Assurance (NALFOQA) for obtaining and analyzing the data recorded in flight [operations] to improve flight-crew performance, air carrier...
MoreThe spherical radome of 12.88m dia. was designed and developed by NAL as EM protective enclosures for BEL/ISRO DWRs. The second generation of radomes named as Mark II...
MoreIn the late 1980s a solar selective and cost effective black chromium coating for water heating and other applications was successfully developed by SED and has been...
MoreIn order to meet the ever changing technological demands, surface modification of advanced engineering materials is essential to improve their performance under complex...
MoreStudy of effect of the impact and extent of the damage on the composite structures, is very much important in the damage tolerant studies. These studies require impact...
MoreTechnology for development of PZT powder at 10 kg / batch Technology developed for preparation of PZT-5H grade powder with high piezo-electric charge constant (d33...
MoreOne of the concerns in resin infusion process, especially when making large integrated co cured aircraft structures with varying thickness, is the knowledge of the flow...
MoreThe direct method of harnessing solar energy is the solar thermal conversion using solar collectors. These collectors use spectrally selective absorber surface which has...
MoreINSAT class of satellites make use of sunshield mirrors for cooling the IR detector of very high resolution radiometer (VHRR). These mirrors are made of aluminum alloys,...
MoreLow apparent density (0.24-0.50 gm/cc) alumina trihydrate (ATH) powder widely used for filler applications have been prepared by controlled hydrolysis of the saturated...
MoreCost-effective electrodeposited wear resistant Ni-SiC (NALNISIC) coating was successfully coated on the bore of the Trochoid of Wankel engine. CSIR-NAL developed Wankel...
MoreCSIR Aerospace, Electronics, Instrumentation & Strategic Sector (AEISS) for Technology Transfer CSIR Covid 19 Technologies Contact: Mr R Venkatesh ...
MoreCSIR-NAL Technologies for Transfer Contact: Mr R Venkatesh Head Business Development Group CSIR-National Aerospace...
MoreSpecifications: 1. 450mm dia, 500mm length, 200 Deg C, 7 bar – Desk top Autoclave 2. 900mm dia X900mm length - 10 bar, 250 Deg C - Divine...
MoreCSIR-NAL developed low cost indigenized a bi-level positive airway pressure, Non-Invasive ventilator device named as “SwasthVayu” which is a microcontroller-based...
MoreCSIR-NAL developed Personal Protective Coverall Suit to Combat COVID-19 CSIR-National Aerospace Laboratories (CSIR-NAL), Bengaluru along with MAF Clothing Pvt....
MoreDrishti - Automatic weather measuring system (D-AWMS) is an indigenously developed another mandatory equipment for Airport operations which gives real time data of...
MoreCSIR-NAL has pioneered the design & development of composite structures for national aircraft programs using innovative and cost-effective fabrication technologies....
MoreLast updated on : 15-12-2020 12:03:46pm